Analysis of Solar Array Support Rack
Analysis of Solar Array Support Rack Structure issues after subjected to a hurricane
Analysis of Solar Array Support Rack Read More »
Finite Element Analysis (FEA) Projects
Finite Element Analysis (FEA) Projects – Design and Thermal, Stress, Vibration & Fatigue Analysis of Equipment to AWS, API, ASME + Codes. This includes Pressure Vessels, Heat Exchangers, Reactors and Skids.
Fatigue and FFS Evaluations of Pressure Swing Adsorption (PSA) Vessels
Fatigue and API 579 / ASME FFS-1 Fitness-For-Service Evaluations on Pressure Swing Adsorption (PSA) Vessels used in a Waste Facility. These evaluations had not been performed as required by the ASME Boiler & Pressure Vessel Code.
Fatigue and FFS Evaluations of Pressure Swing Adsorption (PSA) Vessels Read More »
Stress & Buckling FEA – Powder Decanter to ASME Section VIII Code
ASME Section VIII Division 1 (FEA) stress and buckling analysis on a decanter used to transfer microscopic materials.
Stress & Buckling FEA – Powder Decanter to ASME Section VIII Code Read More »
Vibration & Modal Analysis of an Extruder
Vibration & Modal Analysis of Extruder and Subsequent Design Recommendations
Vibration & Modal Analysis of an Extruder Read More »
Weld Cracking Investigation on T Bar Section of Cyclones
Weld Cracking Investigation on T Bar section of Cyclones. Modal FEA Analysis Determined Mode of Failure. Recommended Design Modifications.
Weld Cracking Investigation on T Bar Section of Cyclones Read More »
Structural & Modal FEA Analysis of Vapor Recovery Unit (VRU) Base Skid
Structural and modal finite element analysis of a Vapor Recovery Unit (VRU) base skid to ensure structural integrity to ASME Boiler & Pressure Vessel (B&PV) Code
Structural & Modal FEA Analysis of Vapor Recovery Unit (VRU) Base Skid Read More »
Structural Analysis of Compressor Skid Nozzles
Structural Analysis of Compressor Skid Nozzles
Structural Analysis of Compressor Skid Nozzles Read More »
FEA Structural Analysis on Waterbox Design Upgrades
FEA Structural analysis on waterbox design upgrades for a MAWP increase to 80 psi – and redesign accordingly
FEA Structural Analysis on Waterbox Design Upgrades Read More »
Evaluation of Loads on High Temperature Condensate Tank Nozzles
Evaluation of Loads on High Temperature Condensate Tank Nozzles
Evaluation of Loads on High Temperature Condensate Tank Nozzles Read More »
Fatigue Analysis of a Heat Exchanger Coil to ASME B&PV Code
Fatigue Analysis of Heat Exchanger Coil to ASME B&PV Code Section VIII Div. 2 Part 5
Fatigue Analysis of a Heat Exchanger Coil to ASME B&PV Code Read More »
FEA Design & Analysis of Chemical Tubular Reactor – To ASME Section VIII Code
FEA design and (thermal & buckling) analysis was performed on a Chemical Tubular Reactor – to ASME Section VIII Code
FEA Design & Analysis of Chemical Tubular Reactor – To ASME Section VIII Code Read More »
CFD Analysis – Blast Furnace Blowpipe Failure
Computational Fluid Dynamics (CFD) analysis of a blast furnace blowpipe failure.
CFD Analysis – Blast Furnace Blowpipe Failure Read More »
Finite Element (FEA) Analysis on a Heater Vessel
Finite Element (FEA) Analysis on Heater Vessel. We perform FEA analysis on components including heat exchangers and vessels.
Finite Element (FEA) Analysis on a Heater Vessel Read More »
Buckling Analysis on Elevated Temperature Vessel under a Vacuum
Buckling analysis on elevated temperature vessel subjected to vacuum. Instantaneous Linear and Nonlinear buckling and Creep Buckling.
Buckling Analysis on Elevated Temperature Vessel under a Vacuum Read More »
Forensic Failure Analysis of Damaged Mining Lift Hook
Forensic Failure Analysis of Damaged Mining Lift Hook – Finite Element Analysis was used to determine root cause
Forensic Failure Analysis of Damaged Mining Lift Hook Read More »
Fatigue Analysis on Threads of Base-Ported Pressure Filter
A client had determined that in very dusty environments where their base-ported pressure filter was used, particles can get in between the threads of the tube and cap.
Fatigue Analysis on Threads of Base-Ported Pressure Filter Read More »
Coke Oven Battery Evaluation in $560 M International Arbitration
Coke Oven Battery Engineering Evaluation – design / construction forensic investigations in $560 M ICC Arbitration.
Coke Oven Battery Evaluation in $560 M International Arbitration Read More »
Cracked NASA Heat Exchanger – Failure Analysis & Redesign
Failure analysis of cracks around bolt holes of the inlet and outlet tubesheets of a NASA heat exchanger.
Cracked NASA Heat Exchanger – Failure Analysis & Redesign Read More »
FEA Design and Analysis – Pressure Vessel Components for Radioactive Waste
FEA design and (thermal, stress, vibration and fatigue) analysis – vessels & other components for nuclear radioactive waste cleanup.
FEA Design and Analysis – Pressure Vessel Components for Radioactive Waste Read More »
ASME Section VIII Design & Analysis – Vessels Processing Nuclear Waste
ASME Section VIII Design & Analysis – thermal, stress FEA analysis on elevated temperature/ pressure vessels to process nuclear waste.
ASME Section VIII Design & Analysis – Vessels Processing Nuclear Waste Read More »
Stress and Fatigue Analysis of High Cycle Vessels used to Produce Hydrogen
Stress and Fatigue analysis of high cycle vessels that are used to produce virtually pure hydrogen.
Stress and Fatigue Analysis of High Cycle Vessels used to Produce Hydrogen Read More »
Vibration and Shock FEA Analysis of Shipboard Heat Exchanger to Engineering Codes
Vibration and shock analysis on a shipboard heat exchanger. Heat exchangers were to be supported on rigid platforms that are attached to the process deck of the ship and therefore subjected to ship motion acceleration loads.
Vibration and Shock FEA Analysis of Shipboard Heat Exchanger to Engineering Codes Read More »
Engineering Analysis of Replacement Reactor Coolant Pump Seals
Engineering analysis of replacement reactor coolant pump seals. In addition, a thermal hydraulic analysis was performed.
Engineering Analysis of Replacement Reactor Coolant Pump Seals Read More »
FEA & Fatigue Analysis – Hydroelectric Turbine Shaft
FEA and fatigue / fracture analysis of the turbine shaft on hydroelectric plant exhibiting linear indications.
FEA & Fatigue Analysis – Hydroelectric Turbine Shaft Read More »
FEA Design and Analysis of Large Scale Pressure Vessels under High Energy Impact
FEA design and (impact, thermal shock, and fatigue) analysis of pressure vessels and equipment subjected to high energy impact with a dual phase fluid at supersonic speed
FEA Design and Analysis of Large Scale Pressure Vessels under High Energy Impact Read More »
