We were asked to perform a failure analysis on a pump used in fracking operations.
The pump is driven through a transmission by a 2700 HP engine which varies in RPM. The transmission is connected to the pump by a universal joint to a flange and shaft assembly. This assembly is made up of a flanged input hub, key, and pump input shaft. The flanged hub and input shaft have an interference fit reducing the overall load on the key. The original design incorporated a 4 inch diameter shaft, which, during testing, had failed. We not only determined the fatigue life of the 4 inch shaft, but also designed a 5 inch shaft to increase the expected design life of the new pumps.
– Failure Analysis & Redesign of an Oil/Gas Threaded Joint Casing
– Failure Analysis of a Seized Piston on a Monel Series 3800 Pressure Relief Valve
– Failure Analysis Services
– Power Plant Consulting